Discover gists

Plex Client Identifier

Cli based tool that assists with collecting client id's for the various devices of a given plex user/account.

Going down the rabbit hole of various automations Plex Webhooks has to offer, I came across webhooks-notifications. The installation steps included getting an auth token via POST request to their API as well as another GET request to fetch the clients under your account.

There were various posts on this forum of people showing their methods of gathering this information; however, the website

Install and setup Ubuntu at a new Lenovo ThinkPad P14s Gen 3 with NVIDIA T550.

Lenovo is certified for Ubuntu

Lenovo provides a short document how to install Ubuntu 20.04

Enter BIOS and disable secure boot, to boot from USB Stick
Install Ubuntu, with "Install third-party software" enabled to include NVIDIA drivers

Update firmware

Last update: 30-01-2024
Last view: 30-01-2024

Step 1

Go to your work folder, mine is located at: F:/Work/EnterpriseName/

And then create a .gitconfig-work with the following data:

Conventional Commit Messages

See how a minor change to your commit message style can make a difference.

Tip

Have a look at git-conventional-commits , a CLI util to ensure these conventions and generate verion and changelogs

	// Add ChatGPT Menu

	const onOpen = () => {
	const ui = SpreadsheetApp.getUi();
	ui.createMenu("ChatGPT")
	.addItem("💾 Save Responses as Text", "saveAsText")
	.addItem("ChatGPT API Sheet by Sarah Tamsin 💜", "openUrl")
	.addToUi();
	};

	In recent days (the last 12-24 hours), there have been a couple of posts on a one
	'Marak Squires', who goes by the tag JimBastard. He stands accused of stealing code,
	and being a general douchebag. Stealing code isn't good. Being a douchebag isn't
	acutally illegal. However, the way that the campaign against him has been carried
	out worries me.

	The post to reddit that brought this issue to attention was entitled 'Code Thief at
	Large: Marak Squires / JimBastard'. It can be found here:
	http://www.reddit.com/r/programming/comments/ebge2/code_thief_at_large_marak_squires_jimbastard/.
	It was a link to a github gist that can be found here:

	// wiring example for ripping a PMW3360 SROM: https://i.imgur.com/EspAlvz.jpeg
	// set the board to 240mhz or higher for best results (WARNING: higher than 240mhz only works with USB if you overvolt the MCU)
	// this implements reading SPI mode 3. if you want a different mode, you need to edit these two lines:
	// uint32_t clockval = (1 << pin_clock);
	// if (newclock && !clockval && buff_i < buffsize)


	#include <pico/stdlib.h>

	#define buffsize 50000


	<!DOCTYPE html>
	<html lang="en">

	<head>
	<meta charset="UTF-8">
	<meta name="viewport" content="width=device-width, initial-scale=1.0">
	<title>Entraînement Verbes Irréguliers</title>
	<style>
	.correct {

Discover gists

Plex Client Identifier

Step 1

Conventional Commit Messages

Commit Message Formats

Default