Simply include the file within your configuration.yaml
file like this:
# ...
template: !include templates.yaml
# ...
You will need prices input number from this gist and the RTE Tempo extension.
;; markdown-notebook mode | |
;; Helps you to insert python code blocks and execute their results | |
;; and place output back inside the document. | |
;; Install | |
;; Put this file somewhere and then add the following line to your emacs.el | |
;; (load-file "~/path/to/mdnb.el") | |
;; Help | |
;; Load the minor mode with M-x markdown-notebook-mode |
Thank you to SpecterOps for supporting this research, to Elad for helping draft this blog, and to Sarah, Daniel, and Adam for proofreading and editing! Crossposted on the SpecterOps Blog.
What follows is the culmination of two years of research with funding by SpecterOps and contributions from many of my coworkers.
Special thanks are needed to Elad, Lee, Will, Daniel, and Kai. Elad, Lee, and Will have contributed several ideas to the project, which are documented here, and have each spent multiple days testing the tool. Daniel has answered all of my inevitable questions about AzureAD (whoops, now Ent
#!/usr/bin/env python | |
import math | |
import matplotlib.pyplot as plt | |
import torch | |
import torch.nn as nn | |
from sklearn.datasets import make_moons | |
from torch import Tensor | |
from tqdm import tqdm |
import mmap | |
import torch | |
import json | |
import os | |
from huggingface_hub import hf_hub_download | |
def load_file(filename, device): | |
with open(filename, mode="r", encoding="utf8") as file_obj: | |
with mmap.mmap(file_obj.fileno(), length=0, access=mmap.ACCESS_READ) as m: |
Starting in 1.20, the Material class has completely disappeared and has been replaced with a series of properties that are chained to BlockBehavior.Properties.of
. This list exists so you can easily figure out which propeties to use to replace the old materials.
Every Material here gives its default MapColor (previously known as MaterialColor), regardless of if it had one or not. It also defines which properties to use to replicate the exact behavior used previously.
The very bottom of this file defines the more complicated replacements to certain material properties.
A very brief guide to Rust syntax. It assumes you are already familiar with programming concepts.
This was written in 2014. It is not a good reference for Rust today, though the content is still correct.
cheats.rs looks like a good alternative.
Here are the steps to follow in order to read your cards. Your goal is to find as many keys as possible. The keys unlock sections of your card for the Flipper to read them - you must have a card. Once you read enough sections, you can use an emulated or cloned card at the original card reader to unlock it (sometimes even without finding all of the keys!).
Steps:
# Parse Kicad schematic netlist into a LinuxCNC HAL configuration file | |
# | |
# Ed Nisley - KE4ZNU | |
# 2021-04 | |
import argparse | |
from pathlib import Path | |
import sys | |
from lxml import etree |