Note
This no longer works in browser!
Note
This no longer works if you're alone in vc! Somebody else has to join you!
How to use this script:
- Accept the quest under User Settings -> Gift Inventory
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> | |
<CodeBlocksConfig version="1"> | |
<editor> | |
<colour_sets> | |
<ACTIVE_COLOUR_SET> | |
<str> | |
<![CDATA[modnokai night shift v2]]> | |
</str> | |
</ACTIVE_COLOUR_SET> | |
<ACTIVE_LANG> |
# First setup Ubuntu 20.04 on your SD card if you haven't already | |
# I assume by this point you have the Ubuntu SD card still in your laptop/pc | |
# We need to copy the cat tool to the SD card | |
# Download the installer here: https://cat.eduroam.org/ | |
# Add the cat installer to the pi SD card; run these commands on your laptop | |
mkdir /mnt/rpi | |
# Find the block device for your SD card. Be careful here -- you can mess up your OS if you choose the wrong device! | |
lsblk # You should see something like | |
# mmcblk0 259:0 0 15.4G 0 disk |
$ brew install dnsmasq
...
$ cp /usr/local/opt/dnsmasq/dnsmasq.conf.example /usr/local/etc/dnsmasq.conf
/usr/local/etc/dnsmasq.conf
address=/local/127.0.0.1
pfsense: | |
version: 2 | |
auth: | |
community: public | |
walk: | |
- 1.3.6.1.4.1.12325.1.200.1.1 #SNMPv2-SMI::enterprises::BEGEMOT-PF-MIB::pfStatus | |
- 1.3.6.1.4.1.12325.1.200.1.2 #SNMPv2-SMI::enterprises::BEGEMOT-PF-MIB::pfCounter | |
- 1.3.6.1.4.1.12325.1.200.1.3 #SNMPv2-SMI::enterprises::BEGEMOT-PF-MIB::pfStateTable | |
#not interesting | |
#- 1.3.6.1.4.1.12325.1.200.1.4 #SNMPv2-SMI::enterprises::BEGEMOT-PF-MIB::pfSrcNodes |
This is a summary of how to start your own NextJS app, create the repo on Github, upload later in an AWS EC2 Instance and automate the process with AWS Codebuild, CodeDeploy, & CodePipeline.
After following these instructions you should be able to: